Nikon K Series, Инструкция по эксплуатации

Страница: 152 / 198

5 Menu Key
134 Nikon N Series/K Series Total Station Instruction Manual
Editing an item in the point list or code list
Use
[^]
or
[v]
to highlight the item that you want to edit.
Then press the
Edit
softkey.
An editing screen appears. For points, the Edit Item
screen appears. It contains only the PT field. For codes,
the Edit Code screen appears, containing the CD field
and the REC field.
Edit the text shown and then press
[ENT]
.
A confirmation screen appears. Press
[ENT]
or the
Yes
softkey to accept the changes and update the list.
Edit code list
• The Edit Code screen has two fields. The CD field contains the text that
appears in the list screen. The REC field is optional. It contains the text
that is stored in the job. If you leave the REC field blank, the value in the
CD field is used.
• You can use the REC field to use familiar words or codes on the screen,
but store a numeric code in the job. For example, if you set the CD field to
MANHOLE and the REC field to 1155, the text MANHOLE appears on the
screen, but the code 1155 is stored.
If you press the Edit softkey when a layer name appears, only the Lyr field
appears. To save changes to the layer name, press
[ENT]
in the Lyr field.