Nikon K Series, Инструкция по эксплуатации

Страница: 60 / 198

3 Getting Started
42 Nikon N Series/K Series Total Station Instruction Manual
Inputting Data
Entering a point name or number
You can use numeric or alphanumeric names up to 16 characters long to identify
points.
The default name for a new point is the last point name entered, with the last digit
incremented. For example, if the last point name was A100, the default name for the
next point is A101.
If the last character of the previous point name is alphabetic, the default point name is
the last point name.
When the cursor is in a PT (point) field, there are several ways to specify a point, or
input coordinates.
Entering an existing point
When you enter a known point name or number, the
coordinates of that point are displayed briefly. A short
beep sounds before the next screen appears or the next
field is selected.
To adjust the duration of the coordinate window display, go to
MENU >
Settings > Others . To leave the window open until you press
[ENT]
,
set the XYZ disp field to +ENT. For more information, see page 121 .