manualshive.com logo in svg

Nikon ECLIPSE T-17-369, Инструкция по эксплуатации

Инструкция по использованию Nikon ECLIPSE T-17-369 доступна для бесплатного скачивания на нашем сайте. В ней содержится подробное описание всех возможностей и функций этого изделия. Скачайте руководство сейчас и начните пользоваться вашим новым оборудованием без проблем.

Поделиться
Скачать
background image

Safety Precautions 

x 

 

 

WARNING 

 

 

 

 

 

 

7.  Fluorescence LED illumination system (for using the epi-fluorescence attachment) 

The light source used for epi-fluorescence microscopy requires special care during handling 
because of its characteristics. 
Be sure to use the specified D-LEDI fluorescence LED illumination system. Carefully read the 
manual supplied with the illumination system before operating the system. Use of other light 
sources may result in unexpected accidents. 

• 

Ultraviolet light 
When lit, the D-LEDI fluorescence LED illumination system radiates ultraviolet light that can 
damage the eyes and skin. Do not view light coming from the light source. Direct viewing of the 
light might result in blindness. When changing filter cubes, always turn off the LED illumination. 

• 

Heat 
When the fluorescence LED illumination system is lit, the LED house of the LED illumination 
system becomes hot. Do not touch the LED house with bare hands or place flammable materi-
als near the LED house. Doing so might result in burns or fire. 

8.  Notes on handling flammable solvents 

The following flammable solvents are used with this product: 

• 

Immersion oil (Nikon immersion oil for oil immersion lenses) 

• 

Absolute alcohol (ethyl alcohol or methyl alcohol for cleaning optical components) 

• 

Petroleum benzine (for removing immersion oil) 

• 

Medical alcohol (for disinfecting the microscope) 

Keep these solvents away from fire. Before using a solvent, carefully read the instructions provid-
ed by the manufacturer of the solvent, and handle it correctly and safely. Note the following 
precautions when using solvents with this product. 

• 

Keep solvents away from any parts that might become hot. 

• 

Keep solvents away from this product and the periphery of the product when turning the power 
switch on or off, or plugging in or unplugging the power cord. 

• 

Be careful not to spill solvents. 

9.  Handling of dangerous specimens 

This microscope is designed primarily for microscopic observation of living cells and tissue cul-
tures in petri dishes and other vessels. 
Before handling a specimen, check to see if it is hazardous. If the specimen is hazardous, follow 
the standard procedure of your laboratory. When handling specimens that may involve a risk of 
infection, wear rubber gloves and do not touch the specimen directly. Be careful not to spill the 
specimen. If a specimen is spilled over this product, or otherwise comes into contact with it, clean 
the affected area thoroughly following the standard procedure of your laboratory. 

 

 

 

Содержание ECLIPSE T-17-369












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ECLIPSE T-17-369

Olympus BX63 Instructions Manual preview
BX63
Бренд: Olympus Страницы: 56
Bresser 5770500 Instruction Manual preview
5770500
Бренд: Bresser Страницы: 16
Bresser 58-02000 Operating Instructions Manual preview
58-02000
Бренд: Bresser Страницы: 32
Bresser 5101100 Instruction Manual preview
5101100
Бренд: Bresser Страницы: 28
Bresser 51-01000 Instruction Manual preview
51-01000
Бренд: Bresser Страницы: 28
Bresser 88-54200 Operating Instructions Manual preview
88-54200
Бренд: Bresser Страницы: 102
Levenhuk 320 User Manual preview
320
Бренд: Levenhuk Страницы: 50
Bresser MicroSet 40x-1024x Operating Instructions Manual preview
MicroSet 40x-1024x
Бренд: Bresser Страницы: 60
Bresser Science ADL-601P Instruction Manual preview
Science ADL-601P
Бренд: Bresser Страницы: 16
Bresser BioScience Instruction Manual preview
BioScience
Бренд: Bresser Страницы: 16
Bresser junior 40x-2000x Operating Instructions Manual preview
junior 40x-2000x
Бренд: Bresser Страницы: 48
Vanguard 1241MM Operation Manuals preview
1241MM
Бренд: Vanguard Страницы: 4
Olympus MX61 Assembly Manual preview
MX61
Бренд: Olympus Страницы: 48
Westinghouse WCM11100B User Manual preview
WCM11100B
Бренд: Westinghouse Страницы: 20
FS FFOI-605 Quick Start Manual preview
FFOI-605
Бренд: FS Страницы: 7
FS FFOI-606 Quick Start Manual preview
FFOI-606
Бренд: FS Страницы: 10
insize ISM-M1000 Operation Manual preview
ISM-M1000
Бренд: insize Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды