manualshive.com logo in svg

Nikon ECLIPSE T-17-369, Инструкция по эксплуатации

Поделиться
Скачать
Nikon ECLIPSE T-17-369 Скачать руководство пользователя страница 166

Chapter 7    Assembly of the Devices 

146 

  7.8.4    Attaching a Filter Slider for Dia Illumination (Optional)

 

Desired filters can be attached to the TI2-D-SF filter slider for dia illumination. (Tool: 2 mm hexagonal 
screwdriver, supplied with the microscope main body) 
The filter slider for dia-illumination is an option that is recommended when a D-LH/LC precentered 
lamphouse is used for dia-illumination. 

 

 

CAUTION 

 

 

 

 

 

 

 Precautions against heat: 

Do not touch the precentered lamphouse while the lamp is lit and for approximately 30 minutes after it has 
been turned off. 

 

 

 

  Handling of the optical components 

Do not touch the surface of optical components such as the filter with bare hands. 

 

1. 

Remove the slider portion from the filter 
slider for dia illumination. 

The stoppers at both ends are used to limit the 
sliding movement of the slider portion.   
Press the stopper on the side opposite to the 
knob to release the lock to remove the slider 
portion from the slot. Pulling the slider portion 
forcibly might damage the stopper. 

 

   

 

 

Removing the slider portion 

2. 

Attach fixed filters inside the cover. 

Two filters can be attached inside the cover. 
The filter mounting hole inside the cover has 
three stoppers to keep the filter from falling. 
Attach the filter while pinching the movable 
stopper on the upper side. 

 

 

 

Attaching a fixed filter 

3. 

Attach a required filter to the slider portion. 

Attach the slider portion starting with its reverse 
surface. 
The mounting hole has three stoppers to keep 
the filter from falling, and one of them can be 
shifted sideways. Shift this stopper to attach the 
filter. 

4. 

Affix the label indicating the filter type on the 
knob of the slider portion. 

   

 

 

 

 

Attaching a filter 

Slider portion 

Knob 

Knob 

Pinch this stopper. 

Filter

Stoppers to keep the 

filter from falling 

Knob 

Filter

Slider (reverse) 

Stoppers to keep the 

filter from falling 

Содержание ECLIPSE T-17-369












































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды