Nikon ECLIPSE T-17-369 Скачать руководство пользователя

Страница: 10 / 203

Safety Precautions

viii

Symbol

Description

Caution for heat

This symbol label is attached on the front and top
surfaces of the motorized shutter unit to remind the
user of the following precautions:

•

The motorized shutter may become hot if closed
during a period of illumination.

•

Burn risk. Do not touch the motorized shutter
during and immediately after a period of
illumination.

Motorized shutter

Warning (photobiological safety)

This symbol label is attached on the side surface of
the pillar for dia-illumination to remind the user of the
following precautions:

•

Classification of dia-illumination and fluorescent
illumination according to the photobiological risk
groups

•

Do not attempt to view dia-illumination or
fluorescent illumination.

For details, see “10. Photobiological safety” and “11.
Do not attempt to view the illumination section.”
under WARNING.

Pillar for dia-illumination (top side surface)

Caution (filter cube replacement port)

This symbol label is attached near the filter cube
replacement port of the FL turret to remind the user
of the following precautions:

•

Be sure to close the cover of the filter cube
replacement port because light including ultraviolet
light might leak from the port.

•

For details, see “12. Cautions on replacing the filter
cube” under WARNING.

Close the shutter
before opening the cover
of the filter cube slot.

FL turret

WARNING and CAUTION Symbols Used in This Manual

Safety instructions in this manual are marked with the following symbols to highlight their importance. For
your safety, always follow the instructions marked with these symbols.

Symbol

Description

WARNING

Disregarding instructions marked with this symbol may lead to serious injury or death.

CAUTION

Disregarding instructions marked with this symbol may lead to injury or property
damage.

In addition, the following symbols are used in this manual:

Symbol

Meaning

This symbol indicates instructions required to avoid malfunction and failure of the
product and damage to the equipment or parts.

This symbol indicates necessary information and tips on the use of this product.

Hot surface

symbol

Hot surface

symbol

Warning

symbol

Caution

symbol

Filter cube

replacement port

Содержание ECLIPSE T-17-369












































































































































































































Результаты поиска

Содержание ECLIPSE T-17-369

Отзывы:

Похожие инструкции для ECLIPSE T-17-369

Бренды по названию

Популярные бренды

Nikon ECLIPSE T-17-369, Инструкция по эксплуатации

Результаты поиска

Содержание ECLIPSE T-17-369

Отзывы:

Похожие инструкции для ECLIPSE T-17-369

Бренды по названию

Популярные бренды