Nidec FGV-HXY, Руководство по эксплуатации

Страница: 19 / 34

-18-
6.6.2.Storing data
Store the data at setting memory mode (single memory, continuous memory, standard memory).
6.6.2.1.Continuous memory mode
1. During the standard measuring mode, press MEM key. “M” will blink, unit starts to record. Press MEM key, measurement will cease,
then display of the unit is changed from M into the unit.
2. When the memory reaches the 1000th recorded entry, "FULL" appears on the display. The recording is finished and will move to the
standard measuring mode.
Key operation Status Display
(""means blinking)
MEM
Standard
measuring
mode
-
Registering the data
MEM
The record is
finished
When amount of memory number arrives at 1000
6.6.2.2.Single memory mode
1. During the standard measuring mode, press MEM key. “M” turns on at the unit display and one data is recorded.
2. If 100 data points are recorded, “FULL” appears for 1 second at the value display and returns to standard measurement mode
.
Key operation Status Display
MEM
Standard
measuring
mode
-
Registering the data
6.6.2.3.Standard memory mode
Press MEM key during standard measuring. “M” blinks at the unit display designating that max., min., and peak values are being
recorded. Press MEM key again to finish measurement. Display of the unit returns to the standard display.
Key operation Status Display
(""means blinking)
MEM
Standard
measuring
mode
-
Registering the data
MEM
The record is
finished
When amount of memory number arrives at 100
When amount of memory number arrives at 50