![background image](http://html1.mh-extra.com/html/nidec/fgv-hxy/fgv-hxy_operation-manual_1687899027.webp)
-26-
7.External Connection
7.1.Pin assignment
Pin
Number
Signal Name
1
2
Analog GND
3
R x D (RS-232C Received data)
Host computer; FGP
4
Digital GND
5
Detection of Connection
6
T x D (RS-232C Transmitted data)
FGP; Host computer
7
Connection disabled *1
8
Compression overload
/ LO output of comparator *2
9
Tension overload
/ HI output of comparator*2
10
Common of overload / comparator
HR12 - 10RC - 10SDL made in Hirose is
used for connector.
*1 Leave the pin (7) always unconnected.
*2 Switch of overload output/comparator output can be set
by external output setting (f06) of function mode.
7.2.RS-232C Output
You can operate this equipment from your PC if connecting it by using optional cable for RS-232C.
* Cannot use USB communication and RS-232C communication at the same time.
7.2.1.RS-232C interface
Baud rate*
2400, 4800, 9600, 19200 bps
Length of data bit
8bit
Parity bit
None
Length of stop bit
1bit
Flow control
None
* Please set baud rate according to RS-232C baud rate setting (f04) of function setting.
Default factory settings is 2400 bps. Please use your equipment as the above parameter.
Alphanumeric characters and carriage return (cr) of ASCII code is used for transmitting data.
10
9
8
7
6
5
4
3
2
1
RS-232C communication cable: 2 m (Option)
Содержание FGV-HXY
Страница 34: ...33...