Nidec FGV-HXY, Руководство по эксплуатации

Страница: 11 / 34

-10-
Key operation Display
PEAK
ZERO
MEM
UNIT
Press UNIT to cycle
through settings
ZERO
Save current setting and return to the standard measuring mode.
PEAK
Save the change and then move to f03.
5.2.Display update time: f02
It's available to set the display update time for 1 time/second, 2 times/second, 3 times/second, 5 times/second, 10 times/second and
20 times/second. After the setting, the averaging value within display update time is shown every display update time.
Press the UNIT key to choose the display update time (1, 2, 3, 5, 10, 20 (times/second). Press the PEAK key to move ahead.
1 time"sec"
2 times"sec"
3 times"sec"
5 times"sec" 10 times"sec"
20 times"sec"
Key operation Display
PEAK
ZERO
MEM
UNIT
Press UNIT to cycle
through settings
ZERO
Save current setting and return to the standard measuring mode.
PEAK
Save the change and then move to f04.
5.3.Auto power off: f03
If the gauge is on and there is no activity for 10 minutes*, the unit automatically powers off to conserve battery charge (When
connected with the AC adapter, the Auto Power off function does not work.). “PWR” appears to notify that there is 1 minute
before power off.
Press the UNIT key to switch the auto power off, Press the PEAK key to move ahead
*No activity means there is no key operation, RS-232C communication, USB communication, or no change of measuring value.
Auto power off, 10 min
Auto power off is not available.
5.4.Baud rate of RS-232C: f04
It's available to set the baud rate of RS-232C.
Press the UNIT key to switch the Baud rate (2400, 4800, 9600, 19200(bps)) * Press PEAK key to move ahead.
Key operation Display
PEAK
ZERO
MEM
UNIT
Press UNIT to cycle
through settings
ZERO
Save current setting and return to the standard measuring mode.
PEAK
Save the change and then move to f05.
2400
bps
4800
bps
9600
bps
19200
bps