Nidec FGV-HXY, Руководство по эксплуатации

Страница: 6 / 34

-5-
3. Product Diagram
3.1.Main Unit
1 Sensor shaft Force bolt (Push/Pull force)
2 Display Display the load and the unit
3 Judgment LED Light on the LED as the result of comparator judgment
4 PEAK key
• Switch the mode (standard measuring mode; +peak hold mode; -peak hold mode)
• Tracking ON/OFF
• It is used for comparator/memory setting
5 UNIT key • Switch the unit (N; Kg; lb(oz); N)
• It is used to reverse the display.
• Tracking ON/OFF.
• It is used for comparator/memory setting.
6 ZERO key • Tare at standard measuring mode (not display a peak value).
• It is used for function setting.
• Press the ZERO key under the peak hold mode (display the peak value), to clear the peak value. In this case,
• tare does not perform. If you need tare, press the peak key to change into standard measuring mode,
• then press the Zero key.
• It is used for comparator/memory setting.
7 POWER key • Press the POWER and release to turn ON/OFF.
• It is used to reverse the display.
• Tracking ON/OFF.
• It is used for comparator/memory setting.
8 MEM key • Press the MEM key under the standard measuring mode (not display peak value), then measuring
• value is memorized.
• It is used to recall the memory data, and setting High/Low limits.
• It is used for comparator/memory setting.
9 AC adapter port Supply the electricity through the AC adapter.
10 Data output port Connect with a PC and a recorder. (RS232C, analog output and so on)
11 USB port Connect with a PC. (USB)
12 Signal port
Signal port for comparator output, input signal and Mitutoyo Digmatic signal
13 Hanger attachment bolt Attach the hanger with this bolt.
14 Threaded hole Use this threaded hole in order to attach the FGV with a stand.
2) Display
FGV-500/1000HXY
1) Sensor shaft
4) PEAK key
3) Judgment LED
5) UNIT key
6) ZERO key
7) POWER key
8) MEM key
Model number
14) Threaded hole
13) Hanger attachment bolt
12) Signal port
9) AC adapter port
10) Data output port
11) USB port