Nidec FGV-HXY, Руководство по эксплуатации

Страница: 8 / 34

-7-
4.2.Attaching measuring adapter
Please select the measuring adapter depending on the measuring
purpose. Screw the adapter until it stops lightly. Do not screw it
forcibly in order not to give the damage to the sensor.
Do not use scratched
hook or deformed hook.
Flat head Cone head Notched head Chisel
Extension rod
Hook
PEAK ZERO
4.Before use
4.1.Charge
O n l y c h a r g e w i t h
supplied AC adaptor.
Please use AC adaptor supplied with the FGV. An alternate adaptor
could cause damage and fire.
The unit's battery may be depleted upon first use. Plug
attached AC adaptor and charge before you use.
1. Please connect the attached AC adapter into the AC adapter
port
of the body, and then plug the adaptor into an outlet
• Charge the battery. After charging is complete, the charging
automatically stops. •“BAT” will be shown on the LCD display
while charging. After
complete the charging, “BAT” will disappear from LCD.
• Charge time: Up to 16 hours at most.
• Operating time: Approx. 8 hours per 1 full charge.
2. The nickel hydride battery is charged automatically when it is
discharged during the usage of AC adapter.
*If you charge the battery frequently, its lifetime will be shortened.
When you use the FGV with AC adapter, you should not insert and
remove the AC adapter often.
3. Measurements may be taken during charging
4.3.Attaching hanger
4. After the battery power has declined, "LoBAT" appears on the
display. Connect the AC charger. If you leave the gauge turned
on while "LoBAT" is displayed, the power will continue to decline
and the unit will automatically shut off.
AC adapter port
Do not screw the adaptor
on too tightly as it could
damage the sensor.
4.4 Attaching of the handle
Please take off the attached hanger bolt. Fit the
square hole of hanger into the salient part of the
case, and then tighten the attached hanger bolt.
Attach hanger if required. *
When testing by hand, to record the most
stable force, it is recommended to use the
attachment handle.
* Please use a tolerable nail or
winch against the load .
*Only use the attachment
handle when testing by hand.
Hanger attachment bolt
Hanger
Handle
Cover for the handle thread
*Attach handle if required