![background image](http://html1.mh-extra.com/html/nidec/fgv-hxy/fgv-hxy_operation-manual_1687899015.webp)
-14-
Key operation
Status
PEAK
Move to LO limit setting.
MEM
Register the setting, then move
to standard measuring mode.
Turn power off without any
change.
Key operation
Display
Turn the power off
PEAK
ZERO
MEM
UNIT
1. Hold down PEAK key
2. Press POWER key
PEAK
ZERO
MEM
UNIT
Release POWER key only
6.5.Comparator
Compare HI / LO limits which you entered. The results appear on the display. In addition, an output signal of the result is available with
the data output port. In order to activate the comparator function, set Hi-Lo at External output (f06) in the function settings. When you
set "ovEr" at the External output (f06), a result will not appear and the output signal does not perform.
6.5.1.Comparator
6.5.2.Enter Comparator / Memory setting mode
Turn POWER off, press PEAK key and hold, then press POWER key and release (release PEAK key after the value is displayed more
than 1 second).
Display force gauge model
PEAK
PEAK
Comparator HI limit setting
Comparator LO limit setting
Memory mode setting
PEAK
There are following setting items for comparator /memory setting mode.
Item
Display
Content of setting
Default factory setting
Comparator HI limit
HI
Set the comparator HI limit*
0
Comparator LO limit
LO
Set the comparator LO limit*
0
Memory mode setting
MEM
Set the memory mode (single mode, continuous mode, standard mode)
Std
When you set “0”at both HI limit and LOW limit, comparater function does not work.
6.5.3.Setting HI limit
1. Press the UNIT key then all 4 digits turn on and off. Press the UNIT key once more, you can chose sign (plus or minus).
2. Choose 0,1,2,3,4,5,6,7,8,9 at 4 - 1 digit (when you prees UNIT key at 9, it turns 0). Press ZERO key to move right one digit.
In this case, chosen number is displayed with unit which is chosen at standard measuring mode. (When you change the
unit at standard measuring mode after the setting of HI limit, the conversion of the unit for HI limit value is not performed.
After the change of the unit, please set the HI limit again.)
3. Press PEAK key, then move to the setting of comparator LO limit
4. Press MEM key, then setting value is registerd and move to standard measuring mode.
5. When you set both HI and LO limit with “0”, comparater function does not work.
Key operation
Status
Display
UNIT
Choose sign
ZERO
Move to next
digit (right)
UNIT
Change numeric
Press ZERO key
to move right
digit by one digit
When you press ZERO key at first digit, move to 5th digit.
Please release the
PEAK key after the
value appears in the
display more than 1
second.
You can set the value regardless of rating capacity. In the case you set the value which is out of the
range for rating capacity, comparator function might not work properly.
NOTICE
1.
2.
FGV
Содержание FGV-HXY
Страница 34: ...33...