![background image](http://html1.mh-extra.com/html/nidec/fgv-hxy/fgv-hxy_operation-manual_1687899024.webp)
-23-
6.7.3.Standard memory mode
6.7.3.1.Measuring memory data
1. Turn the Power off. Press MEM and hold, then press and release POWER. Release MEM when you see "STd" on the display. The unit
will alternate between showing the data block number, and the recorded measurement value of that block.
2. Press MEM to review the previous data block recorded.
3. Press UNIT to cycle through the available recorded statistics. In standard mode, the available statistics are as follows: positive
maximum value, negative maximum value, positive minimum value, negative minimum value. This is covered in a greater detail in the
next section
4. Press PEAK to output the recorded memory via RS-232C. Refer to section 7 regarding RS232C communications.
Key operation
Display
Turn power off
PEAK
ZERO
MEM
UNIT
1. Hold down MEN key
2. Press POWER key
PEAK
ZERO
MEM
UNIT
Release POWER key only
ZERO
Delete the data when last memory data is displayed.
UNIT
Display the statistics memory data.
PEAK
Output the memory data with RS-232C, and then move to standard measuring mode.
Finish display of the memory data. (Turn power off)
MEM
Please release the
MEN key after the
value appears in the
display more than 1
second.
Display one after
the other
Last memory number
Last display value
Last memory number-1
Memory number 1
MEM
1.
2.
D i s p l a y o n e
after the other
Display one
after the other
Содержание FGV-HXY
Страница 34: ...33...