Nice Hansa Robus 250, Инструкции и предупреждения по установке и использованию

Страница: 26 / 28

Manual movement and release:
before carrying out this operation please note that release can only occur when the leaf is stopped.
To lock: carry out the same procedures backwards.
Control with safety devices out of order: If the safety
de vices are malfunctioning, it is still possible to control the
gate.
• Operate the gate control device (remote control or key-
operated selector switch, etc.). If the safety devices ena-
ble the operation, the gate will open and close normally,
otherwise the flashing light flashes a few times but the
manoeuvre does not start (the number of flashes de -
pends on the reason why the manoeuvre is not enabled).
• In this case, actuate the control again within 3 seconds
and keep it actuated.
• After approximately 2s the gate will start moving in the
“man present” mode, i.e. so long as the control is main-
tained the gate will keep moving; as soon as the control is
released the gate will stop.
If the safety devices are out of order the auto-
mation must be repaired as soon as possible.
!
Replacing the Remote Control Battery: if your radio
control, after a period of time, seems not to work as well, or
not to work at all, it may simply be that the battery is exhau-
sted (depending on the type of use, it may last from several
months up to one year and more). In this case you will see
that the light confirming the transmission is weak, or does
not come on, or comes on only briefly. Before calling the
installation technician try exchanging the battery with one
from another operating transmitter:
if the problem is caused by a low battery, just replace it with
another of the same type. The batteries contain polluting
substances: do not dispose of them together with other
waste but use the methods established by local regulations.
Are you satisfied? If you wish to install another automa-
tion system in your home, call your old installation technician
and use Nice products. You will get the services of a specia-
list and the most advanced products available on the mar-
ket, superior performances and maximum system compati-
bility. Thank you for reading these instructions. We feel con-
fident that you will be well satisfied with your new system:
for any present or future requirements, please contact your
reliable installation technician.
1 Slide the lock cover disc 2 Insert and turn the key clockwise.
3 Pull the release handle 4 Move the leaf manually.