background image

Lear Car2U™ Home Automation System 

Lear Car2U System Owner’s Guide   

Page 1 

 

The Lear Car2U™ System 

The Lear Car2U™ System is a universal transmitter that includes two primary 
features – a garage door opener and a platform for remote activation of devices 
within the home. The Car2U System’s garage door opener function replaces the 
common hand-held garage door opener with a three-button transmitter that is 
integrated into the interior of your vehicle. After being programmed for garage 
doors, the Car2U System transmitter can be programmed to operate security 
devices and home lighting systems.  

Additional Lear Car2U System information can be found online at 

www.learcar2U.com

 or by calling the toll-free Car2U System help line at 866-572-

2728. 

Types of Garage Door Openers (Rolling Code and Fixed Code) 

The Lear Car2U System may be programmed to operate rolling code and fixed code 
garage door openers. 

x

Rolling code garage door openers were produced after 1996 and are code 
protected. Rolling code means the coded signal is changed every time your 
remote control garage door opener is used. 

x

Fixed code garage door openers were produced prior to 1996. Fixed code 
uses the same coded signal every time. It is manually programmed by 
setting DIP switches for a unique personal code.  

To see if your hand-held transmitter is rolling or fixed code, open the battery cover.  

If your garage door transmitter does not have switches (shown below) following the 
rolling code instructions.  

Содержание Car2U











Отзывы: