22
– English
Led 1
Description
• Function programming in progress.
• If it flashes together with L4, it means that the user must carry out the leaf length recognition phase (refer to
Paragraph “4.4 Recognition length of the leaf”).
Led L6
Description
Led L5
Description
Led L3
Description
Led L2
Description
Led L4
Description
During normal operation the device indicates “Thrust” is not active.
Off
Off
Table 23: LED’s on the control unit’s keys
During normal operation the device indicates “Automatic Closing” is not active
During normal operation the device indicates “Automatic Closing” is active.
• Function programming in progress.
• If it flashes together with L2, it means that the user must carry out the device recognition phase (refer to Pa-
ragraph “4.3 Recognition of the devices”).
on
It flashes
Off
During normal operation the device indicates “Close after photo” is not active.
During normal operation the device indicates “Close after photo” is active.
• Function programming in progress.
• If it flashes together with L1, it means that the user must carry out the device recognition phase (refer to Pa-
ragraph “4.3 Recognition of the devices”).
on
It flashes
Off
During normal operation the device indicates “Always close” is not active.
During normal operation the device indicates “Always close” is active.
During normal operation the device indicates “Stand-by” is not active.
During normal operation the device indicates “Stand-by” is active.
• Function programming in progress.
• If it flashes together with L3, it means that the user must carry out the leaf length recognition phase (refer to
Paragraph “4.4 Recognition length of the leaf”).
on
It flashes
Off
on
It flashes
During normal operation the device indicates “Thrust” is active.
Function programming in progress.
on
It flashes
During normal operation the device indicates “Pre-flashing” is not active.
During normal operation the device indicates “Pre-flashing” is active.
Function programming in progress.
Off
on
It flashes
Led L7
Description
During normal operation the device indicates that the CLOSE input activates a closing manoeuvre.
During normal operation the device indicates that the CLOSE input activates a partial opening manoeuvre.
Function programming in progress.
Off
on
It flashes
Led L8
Description
During normal operation the device indicates that NiceHansa Robus is configured as Master.
During normal operation the device indicates that NiceHansa Robus is configured as Slave.
Function programming in progress.
Off
on
It flashes
7.8) Accessories
The following optional accessories are available for NiceHansa Robus:
• PS124 PS124 24 V Buffer battery - 1,2 Ah with integrated battery
charger.
• SMXI 433.92MHz Radio receiver with digital Rolling code.
For information on the complete range of accessories, refer to the Nice
s.p.a. product catalogue.
30
31
Содержание Robus 250
Страница 1: ...NiceHansa Robus Instructions and warnings for installation and use 250 500...
Страница 24: ......
Страница 27: ......