NF DM2571, Руководство пользователя, Страница: 247 / 369

REMOTE CONTROL
243
<NR3> floating point with exponent 4.5e-1, 8.25e+1
<NRf> any of NR1, 2, 3 1, 1.5, 4.5e-1
[MIN]
(Optional
parameter)
For commands, this will set the setting to the
lowest value. This parameter can be used in
place of any numerical parameter where
indicated.
For queries, it will return the lowest possible
value allowed for the particular setting.
[MAX]
(Optional
parameter)
For commands, this will set the setting to the
highest value. This parameter can be used in
place of any numerical parameter where
indicated.
For queries, it will return the highest possible
value allowed for the particular setting.
DEF For commands, this will set the setting to the
default value. This parameter can be used in
place of any numerical parameter where
indicated.
For queries, it will return the default value
allowed for the particular setting.
Automatic
parameter
range
selection
The DM2571 automatically sets the command parameter to the
next available value.
Example conf:volt:dc 3
This will set the measurement item to DC
Voltage and the range to 10V. There is no
3V range so the DMM selects the next
available range, 10V.
Message
Terminator
(EOL)
Remote
Command Marks the end of a command line. The
following messages are in accordance with
IEEE488.2 standard.
LF, CR, CR+LF,
LF+CR The most common
EOL character is
CR+LF
Message
Separator
EOL or ;
(semicolon) Command Separator