078
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
079
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
As you can see this causes an error.
Formula has to be written using keys printed on the screen.
The prompt should be used
ONLY to write channel number.
The same procedure applies for dig, mux and cv buttons.
Figure 72
Figure 73
WARNING:
Channel B (1.B, 2.B, and so on) can’t be used on Virtual Channels. If you need
to use the channel B of a multiaxis sensor, like Voltage 2CH, Vibrating Wire + Thermistor,
and all others, you should use 2 separate channels during configuration.
ADVANCED CONFIGURATION
Overview
Advanced parameters are explained in this section.
•Connection configuration, for Ethernet and 3G modem parameters
• Measure log transfer, for FTP server configuration
• Account management, to change account passwords
• Date and Time, to change timezone or set daytime saving
• Energy management, to improve power consumption especially if battery powered
• Information about firmware versions, mac address, bootloader
This section will show how to configure Advanced parameters in the NI2400’s web server.
Connections
This page allows to set network parameters.
In the first block you select which connection will be used by NI2400 to send Email and FTP
files.
Network Card Configuration
DHCP Enable: to choose whether or not to use DHCP or specify network parameters
Figure 74
3
3
