032
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
033
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
ATTENTION: Do not use at the same time the web interface and display functionality.
When you select SYS menu, the NI2400 enters in configuration mode: in this status the
NI2400 WILL NOT PERFORM THE CONFIGURED ACQUISITIONS. Once you ended the op-
erations in SYS menu, you must return in the main page (with the three icons).
Firmware and Web Updates – Vibrating Wire Firmware Update
To update NI2400 web pages and firmware refer to “
FW & WEB UPDATES – Vibr. Wire FW
Update”
manual.
Data download
It is possible to download data (readings, log events and log alarms files) in two ways:
• PC (through web interface)
• USB (through USB pen drive)
To download data through a PC connected to the NI2400, first configure the PC network
card (with the NI2400’s same class but with different IP). Through the pages “Data Monitor –
Measures, Events, Alarms” is possible to download files as CSV format (compatible with the
most common spreadsheets eg. Microsoft Excel, Apple Numbers, Open Office Calc etc…)
To download data through USB pen-drive (supplied):
• Select through keyboard (“Right” and “Left” keys) the SYS menu and press “Enter” key;
If the NI2400 has an acquisition in progress, is necessary to wait its end. In this case will be
displayed the following screen:
• When the acquisition ends, it will be displayed the following screen:
• Through “Up” and “Down” keys select the option “Download data on USB” and press
“Enter” key;
2
2