062
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
063
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
• Send email will send an email (if RS323 modem OR Ethernet connection with internet is
connected) with the Alarm, to specified recipient (see next section)
• Upload on FTP will upload the Alarm Log’s row (if RS232 modem OR Ethernet connec-
tion with internet is connected) with the alarm triggered
• Enable Digital Output will trigger the backpanel’s terminal block to control an external
Alarm system
• Frequency increase will increase acquisition frequency to gather more information about
the event that has triggered the alarm. Acquisition Frequency is set at 1 minute when the
channel is in ALARM. If the datalogger is configured to read different sensors, and more
than one sensor is in alarm, reading frequency will probably be lower.
There are pretty much the same options in the “NI2400” Section, except for Frequency
increase.
Event Nr
. Dropdown menu will let you choose the number of events in alarm at which
the datalogger triggers the alarm. 1 means at the first occurrence, 2 will skip first value in
alarm, and if it still in alarm during next acquisition the alarm will be triggered, otherwise
there will be no alarm event.
End Dropdown menu will let you choose the number of events after which the datalogger
will cease to trigger. NEVER is the option to disable this feature, and let the datalogger
trigger EVERY set alarm.
After configuration, click Save to proceed.
If you selected SMS, email or FTP, the relative configuration option will be activated.
SMS Configuration
Figure 51
This page will let you select SMS recipient for triggered alarms.
Number: the recipient(s) of the SMS
Sensor Alarm: if you have selected SMS in sensors alarms this will let you use the current
recipient for the sensor alarm
NI2400 alarm: if you have selected SMS in NI2400 alarm this will let you use the current
recipient for the datalogger’s alarm
Add Measure in alarm: it will attach measure value to the SMS.
Text: it allows a small text writing (up to 30 characters) contained in the SMS
Tries: it makes you choose the number of tries if SMS send fail.
Click save to proceed.
Email Configuration
This page will let you select the email recipient for triggered alarms.
Address: the email address of the recipient
Sensor Alarm: if you have selected email in sensors alarms this will let you use the current
recipient for the sensor alarm
Datalogger alarm: if you have selected email in datalogger alarm this will let you use the
current recipient for the datalogger’s alarm
Object: email’s object
Text: a small text (30 charaxters) to be sent with email
SMTP Configuration: it will open a new page to configure SMTP parameters
Save Changes to proceed
Figure 52
3
3
