036
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
037
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
If the NI2400 has an acquisition in progress, is necessary to wait its end. In this case will be
displayed the following screen:
• When the acquisition ends, it will be displayed the following screen:
• Using “Up” and “Down” keys select “System shutdown” and press “Enter”:
You will see the following screen:
Now is possible to cut off the NI2400 power (eg. Extract the “V IN” clamp.
NOTE:
This switch off procedure allows NI2400 to end all the writing/reading cycles
on the SD memory card. If NI2400 power is cut without software shutdown,
a scandisk may occur at next boot.
Display language setup
To modify display language:
• Select “SYS” menu and press “Enter” key:
2
2