052
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
053
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
Digital Sensors Configuration
For digital sensors, the NI2400 family offers an in-depth configuration. After choosing Bau
-
drate and Maximum RS485 Address (
Fig.1
), the User can “Save Changes” and start the con-
figuration of the sensors.
By clicking “Edit” (
Fig.2
) on the sensor row to configure, the system shows typical sensor (IPI,
H-LEVEL, TILTMETER) and a SmartModbus element (
Fig.3
).
SmartModbus is selected if the User has a generic modbus sensor.
Modbus Address is sensor’s modbus address, usually settable from the sensor.
Pre Measure Actions:
Some sensors require either a
command or a condition to be true
before actually pushing
the data in the right register.
Send Command
enabled orders the NI2400
to push data (Value field) in a sensor’s register
Figure 38
Figure 39
Figure 40
Click “Next” to proceed the configuration. Fig.4 shows MODBUS parameters. These are usu
-
ally provided by the sensor’s manufacturer and reported in either the datasheet or instruction
manual.
Figure 41
3
3
