![background image](http://html.mh-extra.com/html/easylog/el-usb-1/el-usb-1_quick-start-manual_523616001.webp)
FIRST INSTALL YOUR BATTERY
Before using the data logger you will need to insert the 3.6V 1/2AA battery provided, following
the instructions below. Replacement batteries available from
Nieuwkoop BV
,
Art.nr. RG7500
PN: BAT 3V6 1/2AA.
Before using the data logger you will need to insert the 3.6V 2/3AA High Temperature battery provided,
following the instructions below. Replacement batteries available from
Nieuwkoop BV, Art.nr. RG7500
,
PN: BAT 3V6 2/3AA H TEMP.
THEN INSTALL YOUR SOFTWARE & USB DRIVER
Windows ™ 2000/XP/VISTA/7
YOUR DATA LOGGER IS READY FOR USE
Ensure the battery is correctly installed.
EL-USB-1, EL-USB-1-LCD, EL-USB-2, EL-USB-2+, EL-USB-2-LCD, EL-USB-2-LCD+,
EL-USB-3, EL-USB-4, EL-USB-5, EL-USB-CO, EL-USB-CO300, EL-USB-TC, EL-USB-TC-LCD
2
1
1
2
3
4
.
.
.
.
.
.
1
2
3
4
EL-USB-1 PRO
For full Installation and Operation Manuals, see the
website www.nieuwkoopbv.nl
3
1. Insert the EL-USB-USB CD into the CD drive of
your computer. If the CD does not automatically
load, navigate to the CD and double click “Setup”
2. Click “Next”
3. Read the “IMPORTANT NOTICE”,
select “I agree” and “Next”
4. Click “Install”
5. Click “Yes”
6. Click “Finish”
7. Click “Install”
8. You have successfully installed the
necessary software and driver for your
EL-USB data logger. An “EasyLog USB”
icon will be placed on your desktop.
When setup is complete, the data logger should be removed from the USB port
to begin recording. If you would like advice on how best to use the data logger
for a particular application, please contact your nearest Lascar representative.
Do not leave your data logger in the USB port as this will cause some of the
battery capacity to be lost
(with the exception of EL-USB-1-RCG; see ‘1. First Install
Your Battery’ for further information).
Set-up, stop or view previously saved data
Double click on the EasyLog USB icon on your Windows™ desktop. This
will load the configuration software. Setup the data logger for a new log,
download a data logger that has been recording, view previously
saved data in graph format and check the current status of the
attached data logger (including the serial number).
Insert the data logger into an available USB port on your PC.
.
Name your logger and select a sample rate
EL-USB-1-RCG BATTERY IS PREINSTALLED
To charge the battery connect to USB port until green LED shows.
Pour la traduction française, voir le CD
Para traduccion en castellano, vea el CD
Per la traduzione in italiano, vedere il CD
Für die deutsche Übersetzung, siehe die CD
electronics
EasyLog Data Loggers
Quick Start Guide