![background image](http://html1.mh-extra.com/html/racelogic/performancebox/performancebox_quick-start-manual_3146641001.webp)
Quick Start Guide
Installation
For
best satellite reception
, ensure your
PerformanceBox
is fixed low down
in the
centre of the windscreen
. The
first time
the unit is used, it will
need to be left for 10-15
minutes
to fully acquire satellites. After this, it will
usually
take 1-2 minutes
to acquire satellites
.
Lap Timing - Setting a
Start/Finish line
Ensure the unit is in Lap
Timing mode.
Press or
button
while driving over
the point you wish
to
define as
your start/finish line
.
Either button
sets lap
start/
finish line
Register your PerformanceBox to activate all functions:
www.vboxmotorsport.co.uk/register
Performance Tests
Ensure the unit is in
Performance Mode
. In this
mode, you can select a number of user-configurable
tests, including
0-60
,
0-100
,
0-100-0
,
¼ mile
etc.
Before starting an acceleration test, ensure the
vehicle is absolutely stationary.
Once a test has been performed and the vehicle has
stopped, you can immediately start another test. You
do not need to press any buttons between tests of the
same type. For best results, perform tests away from
buildings and trees.
Press or
to scroll between
tests
On the SD card:
Performance Tools
software
Circuit Tools software
User manual