Chapter 1. Introduction
|
9
ProSafe Wireless-N Access Point WNAP320 Reference Manual
System Requirements
Before installing the access point, make sure that your system meets these requirements:
•
A 10/100/1000 Mbps local area network device such as a hub or switch
•
The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the
package, or one like it
•
A 100–120 V, 50–60 Hz AC power source
•
A Web browser for configuration such as Microsoft Internet Explorer 5.0 or later, or
Mozilla 3.0 or later
•
At least one computer with the TCP/IP protocol installed
•
802.11b/g- or 802.11b/g-compliant devices, such as the NETGEAR WG511 Wireless
Adapter
