NETGEAR ProSafe WNAP320, Справочное руководство

Страница: 19 / 93

Chapter 2. Installation and Configuration | 19
ProSafe Wireless-N Access Point WNAP320 Reference Manual
3. Login
. The general screen of the the access point displays as shown in
Figure 3,
. The
default settings should be suitable for most users and environments.
•
When the product family is connected to the Internet, you can select the
Documentation link under the Web Support menu to view the documentation for the
product family.
•
Select
LOGOUT
to exit the access point setup screens. (You arel automatically
logged out of the product family after 5 minutes of no activity.)
Figure 3.
4.
Enter the access point name of the WNAP320.
This unique name is the access point NetBIOS name. The access point name is printed
on the rear label of the access point. The default is
netgearxxxxxx,
where
xxxxxxx
represents the last 6 digits of the access point MAC address. You can replace the default
name with a unique name up to 15 characters long.
5.
From the
Country/Region
drop-down menu, select the region where the access point will
be used (the Country/Region is not Configurable in the United States; but is configurable in
the rest of the world). Click
Apply
.
Note:
If your country or region is not listed, please check with NETGEAR
Support.
1.
Select
System
>
Basic > Time
.