NETGEAR ProSafe WNAP320, Справочное руководство, Страница: 43 / 93

22 | Chapter 3. Management
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Remote Console
Remote Console configuration features
are located under the
Maintenance
,
Remote
Management
,
Remote Console
. Enter the following information in the Remote Console
screen, as shown in
Figure 2,
:
• Secure Shell (SSH)
. If set to
Enable
, the wireless access point will allow remote access
only through Secure Shell and Secure Telnet. The default is
Enable
.
• Telnet
. If set to
Enable
, the wireless access point will allow remote access through
Telnet. The default is
Disable
. If Telnet is enabled and the access point is accessed
using a browser, the Telnet access will be disconnected.
Figure 2.
4.
Click
Apply
.
Management Using Telnet
1.
Open a secure Telnet session from your computer to the access point. The screen
shown in
Figure 3,
should display.