Chapter 3. Management
|
21
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Remote Management
Both the SNMP and Remote Console are enabled by default, which allows for remote
management of the WNAP320 from a client running SNMP management software, as well as
from a secure Telnet console.
To set up an SNMP management interface:
1.
Select
Maintenance > Remote Management > SNMP
. The SNMP screen displays, as
shown in
Figure 1.
2.
Enter the following information in the SNMP fields:
•
SNMP. Enable SNMP to allow the SNMP network management software, such as HP
OpenView, to manage the wireless access point through SNMPv1/v2 protocol.
•
Read-Only Community Name
. The community string to allow the SNMP manager to
read the wireless access point´s MIB objects. The default is
Public
.
•
Read-Write Community Name
. The community string to allow the SNMP manager
to read and write the wireless access point´s MIB objects. The default is
Private
.
•
Trap Community Name
. The community string to allow the SNMP manager to send
traps. The default is
Trap
.
•
IP Address to Receive Traps
. The IP address of the SNMP manager to receive
traps sent from the wireless access point. The default is
0.0.0.0
.
3.
Click
Apply.
