NETGEAR ProSafe WNAP320 Скачать руководство пользователя страница 2

Страница: 2 / 93

ProSafe Wireless-N Access Point WNAP320 Reference Manual

NETGEAR, Inc.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form or by any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online,

visit us at

http://support.netgear.com

Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): See Support information card.

Trademarks

NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are

trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are

registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or

trademarks of their respective holders.

Statement of Conditions

To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes

to the products described in this document without notice. NETGEAR does not assume any liability that may occur

due to the use, or application of, the product(s) or circuit layout(s) described herein.

Revision History

Publication Part Number

Version

Publish Date

Comments

202-10724-01

v1.0

September 2010

First publication

Содержание ProSafe WNAP320






























































































Результаты поиска

Содержание ProSafe WNAP320

Отзывы:

Похожие инструкции для ProSafe WNAP320

Бренды по названию

Популярные бренды

NETGEAR ProSafe WNAP320, Справочное руководство

Результаты поиска

Содержание ProSafe WNAP320

Отзывы:

Похожие инструкции для ProSafe WNAP320

Бренды по названию

Популярные бренды