Chapter 2. Installation and Configuration
|
39
ProSafe Wireless-N Access Point WNAP320 Reference Manual
SSID and WEP/WPA Settings Setup Form
For a new wireless network, print or copy this form and fill in the configuration parameters.
For an existing wireless network, the person who set up or is responsible for the network can
provide this information. Be sure to set the regulatory domain correctly as the first step.
•
SSID:
The service set identification (SSID) identifies the wireless local area network.
NETGEAR_11ng
is the default WNAP320 SSID. However, you can customize it by using
up to 32 alphanumeric characters. Write your customized SSID here.
___________________________________
Note:
The SSID in the product family is the SSID you configure in the wireless adapter card. All
wireless nodes in the same network must be configured with the same SSID.
•
Authentication.
Circle one: Open System or Shared Key. (Choose Shared Key for more security.)
Note:
If you select Shared Key, the other devices in the network will not connect unless
they are set to shared key as well and have the same keys in the same positions as those
in the WNAP320.
•
WEP Encryption Keys.
Circle one: 64, 128, or 152 bits. (Enter all four 802.11b/g/n keys for the key size chosen.)
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
•
WPA-PSK (Preshared Key)
Record the WPA-PSK key ___________________________________
•
WPA RADIUS Settings. For WPA, record the following settings for the primary and
secondary RADIUS servers:
Server Name/IP Address: Primary _________________ Secondary
__________________
Port: ___________________________________
Shared Secret: ___________________________________
___________________________________
Use the procedures described in the following sections to configure the WNAP320. Store this
information in a safe place.
