32
|
Chapter 2. Installation and Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
adjacent access points is 5 channels (for example, use channels 1 and 6, or 6 and
11).
–
In “Infrastructure” mode, wireless stations normally scan all channels, looking for an access point.
If more than one access point can be used, the one with the strongest signal is used. This can only
happen when the various access points are using the same SSID.
See
A for links to more information on configuring
wireless channels.
6.
From the
Data Rate
pull-down menu, select the transmit data rate of the wireless network.
The default is Best.
7.
From the
Output Power
pull-down menu, set the transmit signal strength of the access
point. The options are full, half, quarter, eighth, and min. Decrease the transmit power if
more than one AP is collocated using the same channel frequency. The default is Full.
8.
Click
Apply
to save your wireless settings.
9.
From the main menu under Security, select Security Profile Settings.
