Advanced Settings
117
Around Town LTE Mobile Internet
Enable DHCP
Normally, you should enable DHCP, in which case you must configure each device on the
network with one of the following:
•
TCP/IP settings set to obtain an IP address automatically.
•
TCP/IP bound to the Ethernet connection with DHCP.
To enable DHCP:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter
http://netgear.aroundtown
or
http://192.168.1.1
in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the
Sign In
field.
The default password is
password
. The password is case-sensitive.
4.
Click the
Sign In
button.
The Sign In section closes.
5.
Select
Settings > Router > Basic
.
6.
In the LAN section, select the DHCP Server
Enabled
radio button.
7.
In the
DHCP IP Range
starting and ending fields, enter the starting and ending IP
addresses.
These are the starting and ending addresses in the range of IP addresses available for
your device to dynamically (that is, not permanently) assign to computers connected to it.
