2
Anti-intrusion control panels
Warranty
Ness Corporation (as known as Ness in this document) warrants the original
purchaser that this product shall be free from defects in materials and
workmanship under normal use for a period of 24 months. As Ness does not
install this product directly, and due to the possibility that it may be used with
other equipment not approved by Us; Ness does not warrant against loss of
quality, degradation of performance of this product or actual damage that results
from the use of products, parts or other replaceable items (such as consumables)
that are neither made nor recommended by Ness. Seller obligation and liability
under this warranty is expressly limited to repairing or replacing, at Seller's
option, any product not meeting the specifications. In no event shall Ness be
liable to the purchaser or any other person for any loss or damage whether direct
ot indirect or consequential or incidental, including without limitation, any
damages for lost profits, stolen goods, or claims by any other party caused by
defective products or otherwise arising from the incorrect or otherwise improper
installation or use of this product.
This warranty applies only to defects in parts and workmanship relating to normal
use. It does not cover:
• damage arising from improper
maintenance or negligence
• damage caused by fire,
flood, wind or lightning
• vandalism
• fair wear and tear
Ness shall, at its discretion, repair or replace any defective products. Improper
use, that is, use for purposes other than those mentioned in this manual will void
the warranty. Contact Our authorized dealer, or visit our website for further
information regarding this warranty.
Limited
warranty
Ness shall not be liable to the purchaser or any other person for damage arising
from improper storage, handling or use of this product.
Installation of this Product must be carried out by qualified persons appointed by
Ness. Installation of this Product must be carried out in accordance with Our
instructions in the product manual.
Copyright
The information contained in this document is the sole property of Ness. No part
may be copied without written authorization from Ness.
All rights reserved.
Directive
compliance
Hereby Ness declares that the SmartLiving series of intrusion-control panels, the
Air2 series of devices and the SecureLink / SmartLink product are in compliance
with the essential requirements and other relevant provisions of Directive 1999/
5/CE.
Moreover, Ness also declares that all other devices mentioned in this manual are
in compliance with the essential requirements and other relevant provisions of
Directive 2004/108/CE.
The full declarations of conformity can be found at URL:
www.nesscorporation.com.
State-of-the-art
installations
(DM 37/08)
The devices described in this manual, in accordance with the settings selected
during the installation phase and the following illustrated guidelines are,
alternatively, in compliance with the the Italian Normative CEI 79-
2:1998+Ab:2000 performance level 2 or European Normative CEI EN 50131-
3:2009 (in reference to Control and indicating equipment - intrusion control
panels) and CEI EN 50131-6:2008 (in reference to Power supplies) security grade
2.
In support of research, development, installation, testing, commissioning and
maintenance of intrusion alarm systems installed in buildings please refer to the
following normative documents:
CEI 79-3 e CEI CLC/TS 50131-7.
When installing Ness products, it is up to the installation company to install
systems equipped with Normative CEI 79-2 compliant devices rather than devices
compliant with European Normatives series EN50131 within and not over the
DOWs summarized in amendment CEI 79-2;V1:2010.
2
Anti-intrusion control panels
Warranty
Ness Corporation (as known as Ness in this document) warrants the original
purchaser that this product shall be free from defects in materials and
workmanship under normal use for a period of 24 months. As Ness does not
install this product directly, and due to the possibility that it may be used with
other equipment not approved by Us; Ness does not warrant against loss of
quality, degradation of performance of this product or actual damage that results
from the use of products, parts or other replaceable items (such as consumables)
that are neither made nor recommended by Ness. Seller obligation and liability
under this warranty is expressly limited to repairing or replacing, at Seller's
option, any product not meeting the specifications. In no event shall Ness be
liable to the purchaser or any other person for any loss or damage whether direct
ot indirect or consequential or incidental, including without limitation, any
damages for lost profits, stolen goods, or claims by any other party caused by
defective products or otherwise arising from the incorrect or otherwise improper
installation or use of this product.
This warranty applies only to defects in parts and workmanship relating to normal
use. It does not cover:
• damage arising from improper
maintenance or negligence
• damage caused by fire,
flood, wind or lightning
• vandalism
• fair wear and tear
Ness shall, at its discretion, repair or replace any defective products. Improper
use, that is, use for purposes other than those mentioned in this manual will void
the warranty. Contact Our authorized dealer, or visit our website for further
information regarding this warranty.
Limited
warranty
Ness shall not be liable to the purchaser or any other person for damage arising
from improper storage, handling or use of this product.
Installation of this Product must be carried out by qualified persons appointed by
Ness. Installation of this Product must be carried out in accordance with Our
instructions in the product manual.
Copyright
The information contained in this document is the sole property of Ness. No part
may be copied without written authorization from Ness.
All rights reserved.
Directive
compliance
Hereby Ness declares that the SmartLiving series of intrusion-control panels, the
Air2 series of devices and the SecureLink / SmartLink product are in compliance
with the essential requirements and other relevant provisions of Directive 1999/
5/CE.
Moreover, Ness also declares that all other devices mentioned in this manual are
in compliance with the essential requirements and other relevant provisions of
Directive 2004/108/CE.
The full declarations of conformity can be found at URL:
www.nesscorporation.com.
State-of-the-art
installations
(DM 37/08)
The devices described in this manual, in accordance with the settings selected
during the installation phase and the following illustrated guidelines are,
alternatively, in compliance with the the Italian Normative CEI 79-
2:1998+Ab:2000 performance level 2 or European Normative CEI EN 50131-
3:2009 (in reference to Control and indicating equipment - intrusion control
panels) and CEI EN 50131-6:2008 (in reference to Power supplies) security grade
2.
In support of research, development, installation, testing, commissioning and
maintenance of intrusion alarm systems installed in buildings please refer to the
following normative documents:
CEI 79-3 e CEI CLC/TS 50131-7.
When installing Ness products, it is up to the installation company to install
systems equipped with Normative CEI 79-2 compliant devices rather than devices
compliant with European Normatives series EN50131 within and not over the
DOWs summarized in amendment CEI 79-2;V1:2010.
Ness Smartliving
Installation and Programming Manual
Document Part No: 890-443
All rights reserved. No part of this publication may be reproduced, transmitted or stored in a retrieval system in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Ness.
Ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of ongoing
product development and improvement.
© 2014 Ness Corporation Pty Ltd ABN 28 069 984 372
www.nesscorporation.com
National Customer Service Centre
Ph: 1300 551 991
CEI 79-2
EN 50131-3
EN 50131-6
CEB T01
