48
Installation project via the SmartLeague
To remove a component from the structure, select it and press DEL on the com-
puter keyboard.
3. To download the data
to the control panel
, click-on the
key. Downloading
operations will:
•
Block all system keypads.
•
Broadcast the “PROGRAMMING” message to all the keypads.
•
Force all the system keypads to standby status.
•
Bring the call queue and events log to a temporary standstill, thus there will be no
events saved to the log, no outputs activated and no outgoing calls.
When the downloading phase terminates, the control panel will complete the
operations it usually carries out on exiting the Installer menu, as described in
paragraph 6-2 Accessing the Installer menu
.
Note
During the read and write phases, ensure that the control panel partitions are disarmed. This
condition is not necessary when you are viewing the events log.
The SmartLeague software programme provides data transfer buttons (
and
) for
read/write operations relating to all programming in progress, these buttons are located
under the Menu bar. It also provides buttons for read/write operations relating to the
project layout or open programming session, these buttons are located in the top left-
hand corner of the page concerned.
4. Additionally, the SmartLeague software programme provides a button
that
allows you to create a file which interfaces with supervisory software such as
Ness's SmartLook or WinMag (ask you dealer for details).
PROGRAMMING
FROM COMPUTER
