Nera WiLink-I 3000, Системное руководство

Страница: 110 / 250

90 Operation
Chapter 4 - Operation and Administration
4.5.3.1.5 Management Port Management Traffic Enable/Disable
The Management Port Management Traffic Enable/Disable parameter allows
enabling/disabling remote management traffic via a router connected to the
Management port. This parameter does not affect management traffic via the local
subnet defined by the Management Port IP Address and Management Port Subnet
Mask.
If remote management for the Management port is disabled, then the unit can be
managed by any PC on any of the following subnets (provided the PC is defined as
an Authorized Manager):
A
The local subnet of the Management port (defined by the Management Port IP
Address and Management Port Subnet Mask parameters).
B
The local subnet of the Data port (defined by the Data Port IP Address and
Data Port Subnet Mask parameters).
C
Any subnet reachable via the default Gateway of the Data port (if Data Port
Gateway is defined).
If remote management is enabled for both the Data Port and the Management
port, then the unit can be managed by any PC on any of the following subnets
(provided the PC is defined as an Authorized Manager):
A
The local subnet of the Management port (defined by the Management Port IP
Address and Management Port Subnet Mask parameters).
B
The local subnet of the Data port (defined by the Data Port IP Address and
Data Port Subnet Mask parameters).
C
Any subnet reachable via the default Gateway of the Data port (if Data Port
Gateway is defined).
D
The Static Route subnet (defined by the Management Port Dest Subnet and
Management Port Dest Subnet Mask parameters) reachable via the Gateway of
the Management port.
4.5.3.2 Data Port Parameters
These parameters define the IP and Ethernet parameters for the Data (DATA) port
connecting the base station to the backbone.
NOTE
To prevent the undesired situation where remote management traffic is unintentionally disabled in
both the Management and Data ports, the Data Port Management Traffic Enable/Disable parameter
will be automatically forced to Enabled upon disabling the Management Port Management Traffic,
and vice versa.