NEC VERSA 5000 Series, Руководство пользователя

Страница: 21 / 186

1-10 Getting Started
„
USB Port — Use this port to connect a USB device or
devices to your NEC Versa system.
„
PortBar Ports — Use these ports to secure the optional
PortBar. PortBar ports are located on the back and sides
of the system at each end.
„
External Diskette Drive Connector — Connect the Ex-
ternal Diskette Drive cable that came with your system
to this port. Using the FDD connector frees up the
VersaBay for installing the 20X CD-ROM reader.
„
Parallel Port — Use this 25-pin port to connect a paral-
lel printer or other parallel device. This port provides
ECP mode support. The ECP standard provides you
with a greater transfer speed than the conventional paral-
lel port. It also supports bi-directional and uni-
directional protocols.
„
Serial Port — Use this 9-pin port to connect an external
modem or other serial device.
„
AC Power Port — Lets you attach the NEC Versa 5000
to the AC power source using the AC adapter that
comes with your system. Keep the system connected to
AC power whenever possible to keep the battery pack
and internal CMOS battery charged.
AROUND THE SIDES OF THE SYSTEM
Your NEC Versa 5000 comes with many features on the
left side of the system. The right side of the system features
a port for securing the PortBar and air vents. Keep the air
vents clear to allow for proper air circulation.
!
CAUTION
Do not block the air vents. Doing so can damage
the system by causing it to overheat.