NEC VERSA 5000 Series, Руководство пользователя

Страница: 67 / 186

Using Setup and Power Management 3-11
Once you set a password, you must enter it before your
system will boot up. This feature allows only an authorized
user to access your system, including the Setup program
where you can set or change system parameters.
Set an initial password as follows.
1. Select Security from the menu bar.
2.
Open the Set Supervisor Password screen by pressing
Enter
.
3. In the “Enter New Password” field, enter a password up
to eight characters long. Press
Enter on the keyboard.
4.
Reenter your password as prompted for verification.
Press
Enter
and write your password down and keep it
in a secure place in case you forget it.
A dialog box notifies you that changes have been saved.
Press
Enter
to continue. The “Supervisor Password is”
field changes to Enabled. This password keeps anyone
without the password from making changes in Setup.
5.
Continue to the next field, Set User Password, to enter a
user password. Enter the password twice.
A dialog box notifies you that changes have been saved.
Press
Enter to continue. The “User Password is” field
changes to Enabled.
6.
In the final field on the screen, enable the password on
boot to prevent unauthorized access to the system. The
user must then enter the User Password to gain access to
the system.
Remove a previously set password as follows.
1.
Enter Setup using the previously set password.
2.
In the Security menu, highlight Set Supervisor Password
and press
Enter .