NEC VERSA 5000 Series, Руководство пользователя

Страница: 65 / 186

Using Setup and Power Management 3-9
Main
Use the Main Setup screen to check or modify your basic
system settings. Some fields are read-only fields that simply
display current information.
„
Time and Date — let you adjust your system date and
time.
„
Diskette A — displays the diskette drive type installed in
your system.
„
IDE Adapter 0 Master and IDE Adapter 1 Master —
shows your current hard disk capacity. Submenus to
these two fields let you specify another drive type, define
multi-sector transfer rates, specify LBA mode control,
enable or disable 32-bit I/O, and define transfer mode.
„
Boot sequence — allows you to specify if POST error
messages appear at boot up, what the boot sequence
should be, and whether or not the system checks your
diskette drive type. (Disabling the floppy check speeds
up boot time.)
„
Keyboard — lets you specify the country keyboard to
use, define if NumLock is on or off at boot up, enable
keyclick, and define auto-repeat and delay rates.
„
Touchpad settings — allows you to disable the built in
touchpad when attaching an external PS/2-style mouse.
„
Display features — gives you the chance to define your
display type, the text expansion mode, and the graphics
expansion mode for better viewing.
„
System information — displays information about your
system, including the version of BIOS loaded, total
RAM installed, CPU type, Cache RAM, parallel port
status, and amount of battery charge remaining.