NEC MC2200, Руководство пользователя

Страница: 74 / 142

4-8 Upgrading Your System
Socket for CPU 2
Socket for Voltage Module 2
Figure 4-4. Optional Pentium II Processor
The processor upgrade kit contains a voltage module, processor module, and heat sink
with two heat sink clips. The heat sink has a heat transfer pad on the bottom. To install
the second Pentium II processor upgrade kit:
!
Warning
If the system has been running, any processor and heat sink already
installed on the board will be hot. To avoid the possibility of a burn,
let the components cool for 10 minutes before continuing with the
procedures described here
1.
Power off the system and remove the side panel as described on page 4-3.
Note:
Observe static precautions. Use an antistatic wrist strap.
2.
Remove the terminator card from the CPU 2 socket.
3.
Position the heat sink on the processor module and insert the heat sink clips that
secure the heat sink to the processor.
4.
The processor module is keyed so it can only be inserted one way. Position the
processor over the CPU 2 socket on the board and press down evenly on the
processor until the latches on both sides lock in place correctly.