NEC MC2200, Руководство пользователя

Страница: 54 / 142

3-12 Configuring Your System
Exiting BIOS Setup
To exit Setup, select Exit from the menu bar to display the Exit Setup menu.
The following table describes the options on this menu. Note that ESC does not exit this
menu. You must select one of the items from the menu or menu bar to exit this menu.
SELECTION DESCRIPTION
Save changes and
Exit Stores the selections displayed in the menus in CMOS and exits the Setup
program.
Exit without Saving
Changes Exits the program without saving any changes you have made in this
session. Previous selections remain in effect.
Get Default Values Displays default values for all Setup menus. Useful if BIOS detects a problem
with the values stored in CMOS.
Load Previous
Values
Reverts to previously saved values if the new values have not been saved to
CMOS.
Save Changes Stores the current selections without exiting the Setup program.
Using the Utilities Diskette
The utilities diskette contains the SCSISelect Utility and an Event Log Reader Utility.
Note: Because of license restrictions, the Utilities diskette, as
created by the EXPRESSBUILDER CD-ROM, is not bootable. In
order to use this diskette, you must make it bootable.
To run the Utilities diskette, perform the following procedure:
Note: Perform Step 2 of this procedure the first time you use the
utilities diskette. This step enables the diskette to be MS-DOS
bootable.
1. Using the EXPRESSBUILDER CD-ROM, create the Utilities diskette.
2. Insert the Utilities diskette into floppy disk drive A. At the C:\prompt type:
SYS A:
Press ENTER. MS-DOS system files are copied onto the diskette. Your Utilities
diskette is now bootable.
3. Reboot the system with the Utilities diskette in
Drive A.
4. The MS-DOS Startup Menu displays. See Table 3-6.