NEC MC2200, Руководство пользователя

Страница: 57 / 142

Configuring Your System 3-15
00 : 0Bh AIC7860
5.
Once you select the adapter, the following screen is displayed:
SCREEN DESCRIPTION
Configure/View Host Adapter
Settings Configure host adapter and
device settings.
SCSI Disk Utilities The utility scans the SCSI
bus for SCSI devices,
reports a description of
each device. Run these
utilities
before configuring
SCSI devices.
6.
If you wish to format a disk, verify disk media, or display a list of devices and their
SCSI IDs, select “SCSI Disk Utilities”. If you wish to configure the adapter or a
device, select “Configure/View Host Adapter Settings”.
SCSISelect Configuration Settings
The following keys are active for all SCSISelect screens:
KEY ACTION
Arrows Up and down arrows move from one parameter to another within a screen.
ENTER Displays options for a configurable parameter. Selects an option.
ESC Moves back to previous screen or parameter or EXIT if at the Main menu.
F5
Switches between color and monochrome.
F6
Resets to host adapter defaults.
Table 3-7 shows the normal settings for the SCSISelect Utility and provides a place for
you to record any changes you make to these settings.
Table 3-7. SCSISelect Setup Configurations
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
SCSI Bus Interface Definitions
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Enabled
Additional Options
Boot Device Options Press ENTER for menu
Boot Target ID 0
Boot LUN Number 0
SCSI Device Configuration Press ENTER for menu
Initiate Sync Negotiation Yes
Maximum Sync Transfer Rate
40.0
4
Enable Disconnection Yes
Initiate Wide Negotiation Yes
Send Start Unit Command
Yes
1
BIOS Multiple LUN Support no
1
Include in BIOS Scan
Yes
1
1
No effect if BIOS is disabled.
4
Set to 40.0 for AIC7880 or 10.0 for AIC7860.