6. Windows System Recovery
Express5800/T120e Maintenance Guide
41
Chapter 1 Maintenance
6.
Windows System Recovery
Recover the Windows system by following the instructions below if the files necessary to operate Windows are
corrupt.
Note
After recovering the system, be sure to install each driver and Starter Pack.
See "
Installation Guide (Windows)
" to install Starter Pack and device drivers
.
If hard disk drives cannot be detected, you cannot recover the Windows system.
Create the OEM drivers to removable media depending on the server
configuration.
6.1
Recovery of Windows Server 2012
If the Windows does not start correctly, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose
Repair your computer
in
Windows Setup
wizard
.
We recommend that this option is performed by the system administrator.
6.2
Recovery of Windows Server 2008 R2 and Windows Server 2008
If Windows does not start for some reason, you can recover Windows using the system recovery option. Be
sure to perform this operation under the supervision of a user or administrator who has a thorough knowledge
of this option. For details, refer to Windows Help.
When the OEM drivers are required, copy the files under the following designated folder in
EXPRESSBUILDER to removable media.
Windows Server 2008 R2:
\005\win\winnt\oemfd\ws2008r2
Windows Server 2008 64-bit Edition:
\005\win\winnt\oemfd\ws2008x64
Windows Server 2008 32-bit Edition:
\005\win\winnt\oemfd\ws2008