4. RAID System Configuration
Express5800/T120e Maintenance Guide
96
Chapter 2 Useful Features
4.3.3
Setting a hot spare
Install a hard disk drive
Run LSI Software RAID Configuration Utility
Set the hard disk drive as a hot spare
Exit LSI Software RAID Configuration Utility
1. Install a hard disk drive to be used as a hot spare, and then turn on the server.
2. Run LSI Software RAID Configuration Utility.
3. On TOP Menu, choose
Objects
and then
Physical Drive
.
"Objects - PHYSICAL DRIVE SELECTION MENU" screen appears.
4. Move the cursor to the hard disk drive to be used as a hot spare, and then press <Enter> key.
5. Choose
Make HotSpare
.
6. When choosing
Yes
at the confirmation message, the indication of the hard disk drive specified as a hot
spare changes to "HOTSP".
ONLINE A00-00
ONLINE A00-01
PORT #
0
1
Objects – PHYSICAL DRIVES SELECTION MENU
READY
2