1. POST Error Message
Express5800/T120e Maintenance Guide
122
Chapter 3 Appendix
(4/7)
Error Message
Cause
Solution
AE89
CPU2_DIMM3 with error is
enabled.
An error in CPU2_DIMM3 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8A
CPU2_DIMM4 with error is
enabled.
An error in CPU2_DIMM4 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8B
CPU2_DIMM5 with error is
enabled.
An error in CPU2_DIMM5 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8C
CPU2_DIMM6 with error is
enabled.
An error in CPU2_DIMM6 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
Contact your sales representative.
B000 Expansion
ROM not initialized
Failed to expand option ROM.
Disable expansion of option ROM of the board that
is not used for OS boot.
B001
Expansion ROM not initialized
- PCI Slot 01
Option ROM expansion in PCI
slot 1 failed.
B002
Expansion ROM not initialized
- PCI Slot 02
Option ROM expansion in PCI
slot 2 failed.
B003
Expansion ROM not initialized
- PCI
Slot 03
Option ROM expansion in PCI
slot 3 failed.
B004
Expansion ROM not initialized
- PCI
Slot 04
Option ROM expansion in PCI
slot 4 failed.
B005
Expansion ROM not initialized
- PCI
Slot 05
Option ROM expansion in PCI
slot 5 failed.
Disable expansion of option ROM of the option
board that is not used for OS boot.
Run SETUP, and select
Advanced
PCI
Configuration
PCI Device Controller and
Option ROM Settings
PCIxx Slot Option
ROM
Disabled
. (xx: PCI slot number)
Start SETUP, select
Advanced
Serial Port
Configuration
, and specify the setting again in a
way that the values of Base I/O or Interrupt in
Serial Port A
and
Serial Port B
will not be the
same.
B022
Serial Port Configuration
Overlapped.
Overlapping serial port
configuration was detected.
B030
PCI System Error on
Bus/Device/Function
PCI SERR was detected.
B040
PCI Parity Error on
Bus/Device/Function
PCI PERR was detected.
B201
Onboard LAN 1 – PCIe Link
Failure
Connection failure of PCIe bus
was detected on onboard
LAN1.
B202
Onboard LAN 2 – PCIe Link
Failure
Connection failure of PCIe bus
was detected on onboard
LAN2.
B211
PCI Slot 1 – PCIe Link Failur
Connection failure of PCIe bus
was detected on PCI slot 1.
B212
PCI Slot 2 – PCIe Link Failur
Connection failure of PCIe bus
was detected on PCI slot 2.
B213
PCI Slot 3 – PCIe Link Failur
Connection failure of PCIe bus
was detected on PCI slot 3.
B214
PCI Slot 4 – PCIe Link Failur
Connection failure of PCIe bus
was detected on PCI slot 4.
B215
PCI Slot 5 – PCIe Link Failur
Connection failure of PCIe bus
was detected on PCI slot 5.
B221
Onboard LAN 1 – PCIe Link Width
Error
Link Width error was detected
on onboard LAN1.
B222
Onboard LAN 2 – PCIe Link Width
Error
Link Width error was detected
on onboard LAN2.
B231
PCI Slot 1 - PCIE Link Width
Error
A Link Width error was detected
in PCI Slot 1.
B232
PCI Slot 2 - PCIE Link Width
Error
A Link Width error was detected
in PCI Slot 2.
B233
PCI Slot 3 - PCIE Link Width
Error
A Link Width error was detected
in PCI Slot 3.
Contact your sales representative.