1. System BIOS
Express5800/T120e Maintenance Guide
79
Chapter 2 Useful Features
(2) Power Control Configuration Submenu
On
Server
, chooseo
Power Control Configuration
and then press <Enter> key to show its submenus.
Option Parameter
Description
AC-LINK Stay
Off
[Last State]
Power On
Specifies how the power state should be when the AC power is
supplied again after loss of power. See the table below
Power On Delay Time Mode
[Manually Setting]
Random
Selects a method to specify the delay time before powering on
DC power. This option is selectable when
Power On
or
Last
State
is specified in
AC-LINK
.
Delay Time
[45]-600
Specifies the delay time.The minimum setting may differ from
factory setting.The minimum setting is displayed when
executing
Load Setup Defaults
.
This option is selectable when
Manually Setting
is specified
for
Power ON Delay Time Mode
.
Standby Power Save
[Disabled]
Enabled
Enables or disables the feature that saves the standby power in
standby state. If this option is
Enabled
, the
AC-LINK
setting is
fixed to
Power On
automatically and cannot be changed. With
AC power off state, management, monitoring, and power-on of
server are disabled on remote site. Powering on the server is
available only by pressing POWER Switch.
If
AC-LINK
setting is changed from the remote site with this
option being set, press POWER switch twice to power on the
server.
[ ]: Factory settings