1. System BIOS
Express5800/T120e Maintenance Guide
77
Chapter 2 Useful Features
Option Parameter
Description
Thermal Sensor
Disabled
[Enabled]
Enables or disables the thermal sensor
monitoring feature. If this option is set to
Enabled
and when abnormal temperature is
detected, the system stops at the end of
POST, and waits until the temperature
becomes normal.
Check previous System Config
[Disabled]
Enabled
Enables or disables the feature to detect
system configuration change.
If this option is set to
Enabled
and the
system configuration differs from the
previous boot, the system waits for user’s
intervention before booting.
BMC IRQ
[Disabled]
IRQ 11
Specifies whether to allocate interrupt lines
for BMC.
Post Error Pause
Disabled
[Enabled]
Specifies whether to stop the POST once at
the end of POST if an error occurs during the
POST.
Memory Error
Halt
[Boot]
Specifies whether to stop operation at the
end of POST processing if a memory
resource error occurred while executing
POST. This setting is enabled if
POST Error
Pause
in the
Server
menu is enabled.
Even if this option is set to
Boot
, operation
stops at the end of POST if errors occurred
for all resources.
Power Switch Inhibit
[Disabled]
Enabled
Enables or disables POWER Switch inhibit
feature.
CLI SETUP
[Disabled]
Enabled
Enables or disables the Command Line
Interface SETUP feature. When this option is
set to
Enabled
, the operation of SETUP is
changed to use Command Line Interface. To
switch back to the menu operation, set this
option to
Disabled
.
For command details, execute HELP
command at CLIP SETUP prompt. If the
system is connected with bootable
devices exceeding a certain number of
devices, an error message "Failed to get
Boot Variable data" appears on
command line, and the Boot menu is not
displayed or changing parameter is
disabled. In this case, reduce the
number of bootable devices by
disconnecting any USB devices not
required for bootup, or change
parameter [Option ROM Scan] for
onboard device or PCI slot to [Disabled.]
[ ]: Factory settings