10 SOHOware™ CableFREE
Figure 10. Connect a NetBlaster to a Cable/xDSL Modem
Figure 11. Connect a NetBlaster to a Hub
Note: For the best data transmission/reception quality you should place the
NetBlaster and antennas as high as possible.
step2.
Connect the power adapter to the NetBlaster and power outlet. Turn on
the power. The
POST LED indicator will blink green during the self-
test. If the test is successful, the LED will turn to a steady green, if not, it
will turn to a steady red
Note: Use only the power adapter included in the package. Other types of power
adapter may damage the NetBlaster.
3.2.2 CableFREE PCI Card Installation
To install a CableFREE PCI Card into a computer, simply follow these steps:
step1.
Turn off the power to your computer and all peripherals, and unplug the
power cord from the wall socket
Uplink Port
10Mbps or
10/100Mbps
Normal Port
Antennas
Network Cable
Network Power
Adapter Cord
Cable/xDSL
Modem
Network Cable
Network Power
Adapter Cord
Antennas
Содержание CableFREE
Страница 12: ......
