NDC Communications CableFREE Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 77

background image

ii SOHOware™ CableFREE

COPYRIGHT

©2000 NDC Communications Inc. All rights reserved. No part of this manual
may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language in any form or by any means without the written
permission of NDC Communications Inc.

TRADEMARKS

NDC and SOHOware are trademarks of NDC Communications, Inc. SyGate is a
trademark of SyberGen Inc. All other names mentioned in this document are
trademarks/registered trademarks of their respective owners.

NDC provides this document “as is,” without warranty of any kind, neither
expressed nor implied, including, but not limited to, the particular purpose. NDC
may make improvements and/or changes in this manual or in the product(s) and/or
the program(s) described in this manual at any time. This document could include
technical inaccuracies or typographical errors.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B
Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

•

Relocate the equipment with respect to the receiver

•

Plug the equipment into an outlet on a circuit different from that to which the
receiver is connected

•

Consult your dealer or an experienced radio/TV technician for help

You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.

«
1
2
3
4
...
»

Содержание CableFREE














































































Отзывы:

Нет отзывов

Похожие инструкции для CableFREE

Бренд: CAME Страницы: 4

Univerge SV9300

Бренд: NEC Страницы: 26

Бренд: NEC Страницы: 20

DS2000 IntraMail

Бренд: NEC Страницы: 2

Бренд: Hal Communications Страницы: 25

Бренд: Lanpro Страницы: 5

Бренд: Patton electronics Страницы: 75

RocketLink-G 3088/I

Бренд: Patton electronics Страницы: 61

Бренд: Patton Страницы: 12

Бренд: Patton Страницы: 84

OnSite 3210 Series

Бренд: Patton Страницы: 110

Бренд: Patton electronics Страницы: 2

SMARTNODE 4110 Series

Бренд: Patton electronics Страницы: 78

Бренд: Patton electronics Страницы: 8

Бренд: WAGO Страницы: 2

Бренд: Queclink Страницы: 9

Бренд: Lanner Страницы: 59

VMG5313-BXB SERIES

Бренд: ZyXEL Communications Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды