SOHOware™ CableFREE 13
step1.
Insert the PC Card into the PCMCIA slot of the computer with the 68-pin
connector facing the slot and the label facing up (
Figure 16
)
Figure 16. Inserting the PC Card
step2.
Repeat the above procedure for any other notebooks to be networked
3.3 CableFREE Software Installation
Before CableFREE networked computers can communicate, they need to have the
driver and utility tools installed.
There are two programs included on the CableFREE CD:
1.
CableFREE Device Driver – necessary software drivers for CableFREE
network cards
2.
CableFREE Utility – allows users to setup file and printer sharing functions,
configures the function settings, monitors network performance, checks
system status, and permits notebook users to switch between different
network environments without reconfiguring network settings
For Windows 95 see the next page. For Windows 98 go to page 18, for Windows
NT 4.0 go to page 20,
and for Windows 2000 go to page 21.
Note1: Keep the NetBlaster powered on when you setup your CableFREE PCs
Note2: Most CD drives need time to spin up before they can read the data on the
disk. Check the CD activity LED. Do not proceed to the next screen until
the activity LED stops blinking
Note3: Do NOT click the Cancel button during installation (when the system is
copying files the computer may look idle for a short time)
PC Card
PCMCIA Slot
Содержание CableFREE
Страница 12: ......