NCast Presentation Recorder Reference Manual
•
VGA In –
RGBHV Input from the presenter's PC
•
HDMI-1
– Video input from cameras or com Audio
•
HDMI-2
– Video input from cameras or com Audio
•
DVI-D
– Digital input
•
DVI-A –
Analog Y-Pb-Pr component from a camera source
•
Displayport
– Input from the Displayport output of a computer
•
Composite
– NTSC or PAL input
•
SDI
– 3G-SDI Serial Digital Input + Audio
•
HDMI Monitor Out
– Confidence monitor for the local display – Dual Primary Output
•
VGA Monitor Out
– Confidence monitor to the local display – Dual Secondary Output
•
Audio
– Balanced input connectors, Left Line-In and Right Line-In
•
Audio Line-In, Line-Out, Mic-In
- Unbalanced 3.5 mm. connections. Stereo for Line-In, Line-
Out
•
Audio
– USB microphones
•
Serial Control
– Wired control from a touch panel, such as Crestron or AMX
•
Ethernet
– Connection to the Internet
•
Control 1
– Trigger 1 Contact Closure, Trigger 2 Contact Closure
•
Control 2
– Second Serial Port, Hardware Reset, Power On/Off
•
USB
– For specifying a static IP connection
•
USB
– For saving an archive file
•
USB
– For secure firmware update on closed networks
Note
: Conversion of HDMI or DVI signals to Displayport requires an active (not passive) adapter.
Note
: HDMI-1 and DVI may not be used together in PIP mode
Note
: HDMI-2 and SDI may not be used together in PIP mode
Note
: Dual capture input is limited to HDMI-2 or SDI
1.5. P
RESENTATION
R
ECORDER
– P
HOENIX
B
ALANCED
A
UDIO
C
ONNECTORS
W
IRING
The rack mount model comes with Phoenix balanced audio connectors.
Pin
Signal
Description
1
Ground (Shield)
Cable ground or shield
2
Hot (Tip) +
Audio Hot
3
Cold (Ring) -
Audio Cold
1.6. P
RESENTATION
R
ECORDER
– C
ONTROL
1 C
ONNECTOR
W
IRING
The unit has a connector for two external contact closure triggers (currently reserved for future use).
NCast Corporation
Revision 1.0
Page 7
