NCast Presentation Recorder Reference Manual
The OSD positioning controls (Top-left, Top-right, Bottom-left, Bottom-right) allow the meter display to be
set in an area of the screen that does not obscure other important windows (like the PIP window, for
example).
6.5.5. Configure OSD
The contents of the OSD can be tailored to contain only those elements required to be shown on the
screen:
6.6. T
ELNET
S
ETTINGS
The Telnet tab is used to enable the Telnet Serial Interface to the unit, an interface, which may be used
to send and receive command and control, strings over IP-based networks. See the
Serial Interface
Specification Manual
for complete information on the serial command interfaces.
If the interface is enabled, secure the interface with a unique and non-dictionary password, and configure
the IP restriction field to only allow the IP address of the controller unit to command the Presentation
Recorder.
6.6.1. Telnet
Uncheck access if the serial command interface is not in use.
6.6.2. Password
NCast Corporation
Revision 1.0
Page 58
